Feuling camplates for Twin Cam® engines increases engine oil flow and volume by enlarging critical oil passages and the oil pump reservoirs. The camplates are blue printed and matched to the Feuling oil pumps which allow the Twin Cam® Engine to take full advantage of the increased volume from the Feuling oil pumps.
Made from 7075 billet aluminum which increases the strength and hardness of the camplate, holds tighter tolerances under temperature and allows elimination of the pinion shaft bushing.
Increased oil flow to pinion shaft and connecting rod bearings
Tighter cam bearing bore tolerance for improved press fit
Pressure relief valve and spring are designed for increased volume and pressure, eliminating the need to stretch the spring or use a shim.
Decreases engine temperature by +/- 20 Degrees
When matched with the Feuling Race Pump rear wheel power gains of 3 Horsepower and 4 ft/lbs of Torque are achieved.
For use ONLY with the Feuling oil pumps
Includes bearing retainer plate and hardware
Bolts into stock location
Made in the U.S.A.
Select the Products You Want...
Ready to Buy?
1410 S. Alvernon
Tucson, AZ 85711